Carbon Fiber Sheet – Checker Weave – 1/16″ Thick – 12″ x 12″
$30.44
100% Pure Carbon Fiber sheet
Out of stock
Description
Elevated Materials standard sheets are manufactured using a 0/90 layup schedule, where fibers alternate in the 0 and 90 deg directions. This balance of fiber directions provides a good balance of cost and mechanical properties and is suited for most applications.
All Elevated Materials sheets are manufactured in a hot press, yielding an extremely low void fraction.
Typical applications for these plates include: Drones, Industrial Robotics, Automotive and Marine Dash Panels, Cosmetic Covers, Scientific Equipment and more.
Contact us if you would like to request a custom layup schedule, cut size, surface finish, material type, or thickness. We are always happy to help.
Additional information
| Weight | 0.5156 lbs |
|---|---|
| Dimensions | 12 × 12 × 0.0625 in |
| Part Thickness | 1/16" |
| Part Width | 12" |
| Part Length | 12" |
| Surface Style | Checker Weave |
| Units | Imperial |
Tolerances
Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.
Standard cuts are made on the tile saw and have a tolerance of +.125 inches and -0.0 inches. Tighter tolerances can be achieved with other cutting operations. Please contact us for requests about custom cuts and tighter tolerances.
Related products
-
Carbon Fiber Sheet – Plain Weave – 3/16″ Thick – 6″ x 6″
$34.65 Add to cart -
Carbon Fiber Sheet – Plain Weave – 3/16″ Thick – 12″ x 12″
$134.15 Add to cart -
Carbon Fiber Sheet – Plain Weave – 1/8″ Thick – 12″ x 24″
$181.77 Add to cart -
Carbon Fiber Sheet – Plain Weave – 1/4″ Thick – 24″ x 48″
$1,380.29 Add to cart